Baxi POWER HT+ 1.110 Page 6 User Manual Download

Page: 6 / 44

1.2 Recommendations

Note

Keep this document close to the place where the ap

pliance is installed.

Note

Never remove or cover labels and data plates affixed

to the appliances. Labels and data plates must be

legible throughout the entire lifetime of the appliance.

Immediately replace damaged or illegible instructions

and warning stickers.

Caution

The appliance should be on Summer or Antifreeze

mode rather than switched off to guarantee the follow

ing functions:

Anti-blocking of pumps

Frost Protection

Caution

If the home is unoccupied for a long period and there

is a risk of frost, drain the boiler and the heating sys

tem.

Caution

To enjoy warranty cover, no modifications must be

made to the appliance.

Caution

The frost protection does not work if the boiler is

switched off.

Caution

The integrated protection system only protects the

boiler, not the heating installation

Caution

Remove the boiler casing only to perform mainte

nance and repair work. Always put the casing back in

place after such work.

Warning

Only qualified professionals are authorised to work on

the boiler and the heating installation.

Note

Keep the boiler accessible at all times.

Caution

Installation of the boiler must be done by a qualified

professional in accordance with prevailing local and

national regulations.

Caution

Install the boiler in a frost-free location.

1 Safety

POWER HT +

7609475 - v04 - 15072015

Summary of Contents for POWER HT+ 1.110













































Search results

Summary of Contents for POWER HT+ 1.110

Reviews:

Related manuals for POWER HT+ 1.110

Brands by name

Popular brands

Baxi POWER HT+ 1.110, User Manual

Search results

Summary of Contents for POWER HT+ 1.110

Reviews:

Related manuals for POWER HT+ 1.110

Brands by name

Popular brands