33
USER Section
(en)
7110317.02 (3-10/14)
5.1 GROUPS OF DAYS
This function is used to set one of the 3 available weekly intervals, each with three hourly time bands for switching the boiler on
and off. These are preset but can be modified by the user - programme rows
501...506
. The intervals are:
Mon - Sun
(factory setting)
/ Mon - Fri / Sat - Sun
.
If the system is divided into zones, each with its own Control Panel/Ambient Unit, each single zone must be individually set
on each device.
5.2 SINGLE DAYS
The daily boiler switching on and off phases can all be modified by the user. The 3 pre-set time bands are available for each single
selected day, as indicated in the table at the end of this section.
5.3 HOURLY PROGRAMMING EDIT PROCEDURE (heating / DHW)
After performing hourly programming using the preset programmes, it is always possible to modify the three time bands -
programme rows
501...506
for heating and
561...566
for DHW as described below.
HEATING CIRCUIT PROGRAMMING EDIT PROCEDURE
•
C
B
“Time central heating CH1”
B
programme row
500
(Select days).
•
B
and the
groups of days
field (section 4.1) starts flashing
B
to scroll the days (“Groups of days” or “Single
days”)
B
to confirm.
•
B
programme row
514
(Select default timings?)
B
and
B
to select one of the 3 pre-set programmes of the
“Groups of days” hourly programming (section 5.1) or
B
clockwise by a click to pass to manual programming: programme
rows 501....506.
DHW CIRCUIT PROGRAMMING EDIT PROCEDURE
The procedure for enabling hourly programming of the DHW is the same as the hourly programming for the heating circuit. The
only difference is the name of the menu
“Time hot water”
and the programme rows to set
560
(Select days). To disable this
function, follow the procedure described in the “Resetting the Original Factory Programme” section.
SUMMARY TABLE
GROUPS OF DAYS
PROGRAMME ROW 514 (heating) / 574 (DHW)
Weekly interval
Preset programmes
On1 – Off1
On2 – Off2
On3 – Off3
Mon-Sun
06:00 – 08:00
11:00 – 13:00
17:00 – 23:00
Mon-Fri
06:00 – 08:00
17:00 – 23:00
Sat-Sun
06:00 – 23:00
SINGLE DAYS
PROGRAMME ROWS 501 502 503 504 505 506 (heating) / 561 562 563 564 565 566 (DHW)
Daily interval
Preset programmes
On1 – Off1
On2 – Off2
On3 – Off3
Mon-Tue-Wed-Thu-Fri-
Sat-Sun
06:00 – 08:00
11:00 – 13:00
17:00 – 23:00
To simplify programming existing programmes can be copied to other days of the week. The following procedure is used.
COPYING A PROGRAMME TO ANOTHER DAY
After programming the time band of a certain day, it can be copied to one or more days of the week.
The parameter between brackets “
( )
” refers to hourly programming in
DHW
• From programme row
514 (574)
(if one of the 3 preset time bands has been used) or from programme row
501
(561)
(if manual
programming has been performed) turn the knob clockwise to programme row
515 (575).
•
Copy?
appears on the display.
•
B
Copy to
and the day of the week flashes.
•
B
to scroll the days of the week, select which to copy the programme to and
B
to confirm.
•
Repeat the above point to copy the same daily programme to other days.
•
C
to return to the previous menu.
Summary of Contents for LUNA PLATINUM
