Baxi LUNA HT 1.350, Instructions Manual

Page: 75 / 104

75
instructions pertaining to the user 924.493.3
it
at
gB
3.2 setting the time
3.3 setting the maximum central heating temperature
a) Press either of the keys to access the programming function;
the display will show the letter
p
followed by a number (program line);
020503_0700
Figure 3
b)
press the keys until the display shows P1, referring to the time to be set;
c) press the keys to set the time; on the display, the letter P will start to flash;
d) press the key to save and ex­it the programming function;
- Press the key (2-figure 1) to set the central heating water temperature;
- Press the keys to set the temperature required;
- press either of the keys (1 or 10 - figure 1) to save and return to the main menu.
n.b – With the outdoor sensor probe connected, the key (2 - figure 1) can be used to shift the central heating curve.
Press the keys to decrease or increase the room temperature in the premises to be heated.
3.4 setting the maximum domestic hot water temperature
- Press the key (3-figure 1) to set the max­imum domestic hot water temperature;
- Press the keys to set the temperature required;
- press either of the keys (1 or 10 - figure 1) to save and return to the main menu.
3.5 setting the daily program for operation in central heating and domestic hot water modes
3.5.1 setting the daily times for central heating mode operation
- Press either of the keys to access the programming function;
a) press these keys until the display shows p11 , referring to the program start time;
b) press the keys to set the time;
- press the key; the display will show
p12
, referring to the program end time;
- repeat the operations described in points a and b until the third and last cycle is reached (program line p16 );
- press the key to save and ex­it from the programming function.