23
10.0 Changing Components – Page 23
10.1 Changing Components
WARNING: Isolate the gas supply to the appliance
before changing any components.
1. Remove the controls access door and fender assembly
(Fig. 47 or 48).
2. Carefully remove all the loose coals, front and rear coal
mouldings and the side cheeks.
CAUTION: The coals are extremely fragile and must be
handled accordingly. To avoid soiling ones hands,
gloves should be worn and any inhalation of the dust
should be avoided. Keep the coals away from children
at all times. Never use coals other than those supplied
or Genuine Baxi Spare Parts. Never put additional
coals on the fire.
Please read section 1.2 Important Information
NOTE: After changing any components carry out
checks for gas soundness
10.2 Wentworth Models
(Fig. 47)
1. Pull and lift the trim away from the fire outer frame. It is
attached by the keyways in the inside edge of the trim.
10.3 Kingston 2 Models
(Fig. 48)
1. Lift the trim away from the fire outer frame, disengaging
the location bracket at the top of the appliance. Place trim
on its back to prevent falling over.
Supplied by HeatingSpares247.com
