5.0 Arranging the Coals
7
5.1
Arranging the Coals
It is important that all the coals are used and
arranged as shown in order to achieve the
desired flame picture.
CAUTION:
The coals are extremely fragile and
must be handled accordingly. Gloves should be
worn and any inhalation of the dust should be
avoided. Keep the coals away from children at
all times. Never use coals other than those
originally supplied or Genuine Baxi Spare Parts.
Never put additional coals on the fire. Please
read section 1.2 Important Information and
section 6.1 Cleaning the Fire.
1. It may be necessary to remove some or all of the
coals to retouch or clean them at some time.
Cleaning must only be done using a very soft
brush. Any areas of the coal bed where the coating
has deteriorated may be retouched using the black
stain available direct from Baxi or from your local
Baxi Spares Stockist. Quote Part N
o
043224 when
ordering.
2. The following procedure assumes all the loose
coals, side cheeks, rear and front coals are to be
fitted. If not all the coals require replacement, refer
to the diagrams and determine at which point you
need to commence.
3. Place the right / left hand side cheeks against
the combustion box side walls (Fig. 4).
4. Locate the rear coal behind the combustion box
base front lip and angle it back against the side
cheek location stops (Figs. 4 & 5).
5. Locate the front coal onto the rear coal side
support ledges and behind the lip of the burner
bracket (Figs. 5 & 6).
6. Place 5 of the loose coals into the location
recesses of the front coal, (flat face downward).
The 3 centre coals should rest against the
corresponding rear coal spacer lugs. Orientation of
the coals should be as shown in order to achieve
the desired flame picture (Fig. 7).
7. Place the remaining 4 loose coals between the
front loose coals and the rear coal, (flat face
downwards). Orientation of the coals should be as
shown in order to achieve the desired flame picture
(Fig. 8).
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Combustion Box Base Front Lip
Side Cheek Location Stop
Rear Coal Side
Support Ledges
Burner
Bracket Lip
Rear Coal Spacer Lugs
Summary of Contents for Bermuda Inset 3 BB Super
Page 10: ...8 0 Notes 10 ...
