background image

10

4.0 Other Information

© Baxi Heating UK Ltd 2009

4.4

Servicing and Maintenance

1. To ensure the continued safe and efficient operation of your

Baxi Ambiflo

TM

heat pump it is essential that it is checked and

serviced regularly by an approved qualified Heat Pump engineer. 

2. The servicing interval may vary depending on the location of

the unit. Servicing may need to be carried out more frequently.

Your installer should be able to advise about the service interval. 

3. In the event of a warranty claim it will be necessary to show

that the routine maintenance has been carried out in accordance

with the requirements specified in the Installation Instructions.

Failure to maintain the system may invalidate your warranty.

4.5

Disposal 

1. This unit must not be crushed or incinerated. 

2. The Baxi Ambiflo

TM

Heat Pump contains a number of

components that must be disposed of under controlled

conditions. Under no circumstances should this unit be disposed

of at any Local Authority refuse site without first identifying the

special components to the site operatives or manager. If you are

in any doubt about disposing of this unit at the end of its

lifecycle, contact the Local Authority, Baxi, or your installer. 

Summary of Contents for Ambiflo













Reviews: