4. PACK CONTENTS
Remove all the items carefully to prevent damage. Take special care when handling the
ceramic components. Some items may be contained in the packaging fitments -
Examine the packaging carefully before discarding. Check that all the items are present
and undamaged.
Items below with a letter reference are supplied on a film wrapped card.
Page 16
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
1
Loose parts pack including: -
4
‘A’ screws (No.8 x 6)
6
‘B’ screws (No. 8 x 10)
2
‘C’ screws (M4 x 10)
2
‘D’ screws (M5 x 10)
1
‘E’ Quantum fascia hanging bracket.
2
‘F’ Cable adjusters
1
‘G’ Inlet ‘T’ connector / elbow including
pressure test point, nut and olive.
1
‘H’ Grommet for rear of hotbox.
4
‘I’ Wall fixing plugs
4
‘J’ Screweyes.
1
Hotbox and burner assembly
1
Burner tray trim (Supplied with all
956 models but NOT to be fitted to
the ‘Anthem’.
1
Length of self-adhesive foam seal
2
Tension cables
1
Flue restrictor
1
Strip of floor sealing tape
1
Ceramic fuel effect
1
Fascia / Fascia & firefront
1
Literature pack.
Figure 6. Pack contents (Not all of the components listed may be required)
