6.3.2
Burner Tray trim.
!
The trim is
not
to be fitted to
‘ Anthem’ or ‘Quattro’ models.
!
The fire is supplied with a
burner tray trim. Fit the trim as in
figure 6.
6.3.3
Burner Positioning
!
The two tags at the side of the
burner can be folded against the
side of the burner tray. This may be
required for installations where the
width of the fireplace opening is restricted or when
fitting into a ‘Spanish Basket’ casting (See figure 7).
For installations without the 'Spanish Basket'
casting.
!
Place the burner unit centrally within the fireplace
opening. Position the burner to the rear of the
opening, this may be moved forward
providing the front of the burner tray trim
does not protrude beyond the front plane of
the fireplace opening by more than 33mm
(See figure 8).
For installations with the 'Spanish
Basket' casting.
!
Place the casting centrally within the
fireplace opening. Position the casting to the
rear of the opening.
!
Place the burner unit inside the casting.
!
It is important that the burner tray trim
touches the inner front face of the casting.
This will give the customer greater access to
the control knob.
!
The casting and burner may be moved
forward providing the front of the burner
tray trim does not protrude beyond the front plane of the fireplace opening by more than
33mm (See figure 8).
6.3.3
Locating the burner.
!
Mark onto the floor, the position of the two fixing holes in the front fixing bracket
Page 16
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 8. Burner positioning
Figure 7. Burner tags
Figure 6. Burner tray trim
