shown in the ceramic fuel effect installer and owner guide. This should have been left
inside or attached to this guide by the installer.
Burner.
Remove any deposits of soot or other foreign matter from the solid areas of the burner
with a dry soft brush. Be careful not to brush any particles into the open holes. Remove
any particles from the holes with a vacuum cleaner fitted with a soft brush attachment.
Do not poke wire, etc. into the holes in the burner.
CERAMIC FUEL EFFECT
The installer and owner guide for the ceramic fuel effect is separate from this guide. The
installer may have attached it to this guide or placed it inside. It is important that the
installer and owner guide for the ceramic fuel effect is followed correctly. If replacing
the ceramic fuel effect, where a new guide is supplied, follow the installer and owner
guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.
Removing the fascia.
The fascia is held in place by four retaining
plates at the back of the fascia. These slot
into four retaining brackets on the hotbox.
Firmly hold the sides of the fascia and lift
upward and forward (See figure 6). After
cleaning / fitting the fuel effect, the fascia
can be replaced.
Page 13
OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 6. Fascia removal
