Bavaria Yachts Bavaria 49, Manual

Page: 38 / 41

Sailing Yacht Bavaria 49 Bavaria Yachtbau GmbH
(39) – 40 –
pure chrome. The corrosion can start.
Who is not disapointed about little brown spots on the fittings ? They are caused by flying rust or particles
of iron, which are flying in the air and in all harbours placed near big towns. As soon as the flying rust
will set down to the protective coat of the stainless steel, it destroys the cr-passivity, and this goes very
aggressive and fast.
Stainless steel only stays good looking for a long time, if there’s taken good care of it.
Take it to your habit, if you are washing your boat with clear water, clean also the rail stanchions, pulpits
and pushpits and all stainless fittings thoroughly too. Clear water will wash away the salt, rust and flying
rust, the protective coat will be "ventilated" and it’s function is guaranteed again.
If you have already brown spots, you can use most of all available metal cleanings to take care of the
stainless steel fittings or you take normal polish like you use it for the hull.
Of course – all the best care can not help, if in the first place the fittings are not made out of the right
material or the stainless steel has not been treated correct. Before you will buy the fitting, ask f.e. if the
fitting has been polished electrical.
4.2 Coatings
You may contact your marina or the yard if you have any questions concerning the coatings. Preferably
you should rely on one system of one manufacturer that goes on well together.
4.3 Wearing- and spare parts
As an experienced skipper you will not have difficulties in getting original spare parts. If you need any
help, please contact the yard.
If you need any spare parts but cannot get the original ones you have to pay attention to the stability
values to keep the yacht at the high technical standard it used to have at the time of delivery.
4.4 Repair work
Repairs at the hull (polyester full laminate and polyester sandwich laminate) can be implemented by a
reliable workshop considering the general rules for the processing of polyester resin. The interior
construction was designed in such a way that a non-destructive elimination of defects can be realised. In
regard to the technical equipment you may contact a reliable workshop or your dealer, too.
4.5 Winter storage
We have already given some well-directed advice on winter storage in different paragraphs
of this manual. Generally speaking all firms offering winter storage should meet the latest technological
standard as far as environmental conditions, storage blocks, fire protection and accessibility of your yacht
is concerned. Moreover there should be fixed rules for work, done by the owner himself, to prevent any
interference with other sportsmen.
If possible the following objects should be taken from board and stored in a dry and frost-free place:
-
Ship’s papers and other relevant documents
-
Charts, books and instruments
-
Mattresses, upholstery, blankets and sleeping bags
-
Sails and lines/ropes
-
Foodstuffs
-
Gas cylinders
-
Safety equipment
-
Life raft and rubber dinghy
-
Batteries