Baur SSG 500, Operating Instructions Manual, Page: 26 / 32

4. Servicing / Maintenance
4-2
Safety precautions
The Surge Voltage Generator SSG 500 has a surge capacitor
available which consists of four isolated partial capacitors. Even in
the turned off condition these partial capacitors can show
substantial residual charges. For safety reasons, actions which
involve opening the instrument may therefore be only carried out by
instructed and authorized service personnel.
Service Personnel
- has appropriate training and experience,
- has knowledge about relevant standards, regulations, accident
prevention rules and operating conditions,
- is in a position to perform the required activities and recognize
and prevent possible danger,
- is responsible to immediately report occurring changes in the
instrument which could impair its safe operation,
- is familiar with the instrument, its function and possible sources
of danger,
- has adequate knowledge for maintaining and servicing the
SSG 500
- has been authorized explicitly by BAUR to open the SSG 500
and perform changes on the instrument.
The two fuses F3 and F4 on the front panel of the surge voltage
generator protect the controls of the lifting magnets and the controls
of the optionally connected Intercom SA 32 (option).
The internal fuses F1, F2, F3 and F4 may be replaced by instructed
personnel only.
external fuses
internal fuses
Fuses