Baumuller BUG 622, Manual

Page: 42 / 58

Commissioning
42
Basic Supply Unit BUG 622, 623
5.94034.07a
Baumüller Nürnberg GmbH
WARNING
Prior to connecting the drive, carefully check all higher-level safety equipment for perfect functioning,
to avoid personal injury.
Behavior of the drive in the event of error
Faulty or uncontrolled drive and machine element movement can not be ruled out during initial com-
missioning. Hence special care must be taken.
Protection against contact according to Paragraph 4 Section 4 VBG 4
Protection against direct contact comprises all measures against danger which can result from touch-
ing the active parts of electrical equipment.
Sheets of plastic covering the control electronics, the power stage and the device connection, addi-
tionally prevent accidental contact during commissioning and casual use of control elements located
close to the equipment (DIN VDE 0106 Part 100, Unfallverhütungsvorschrift „Elektrische Anlagen und
Betriebsmittel“ VBG4).
Switch cabinet must have emergency stop facilities using which all voltages causing dangerous situ-
ations, can be switched off. This does not include equipment which, if switched off, would cause an-
other dangerous situation. The releasing element for the emergency stop facility must be arranged
such that it can easily be reached in case of danger. In the event of work which is considerably more
dangerous that usual, another person must be present.
The user is to ensure that no unauthorised persons work on the machine.
The user is obliged to report any changes which may affect the safety of the machine.
On dismantling safety equipment during commissioning, repair and maintenance, the machine is to be
shut down exactly according to instructions. After completion of commissioning, repair and mainte-
nance work the safety equipment is to be reinstalled and checked immediately.