Faulty usage
Instruction handbook
CANopen slave
BM4-O-CAN-03
Document no. 5.02014.06
Baumüller Nürnberg GmbH
14
2.5
2.5
Faulty usage
Listed below you will find some examples of non-appropriate application. The information
below is intended to give you some impression of what non-appropriate application is.
However we cannot state all possible non-appropriate applications here. All applications,
where the notes and information given in this documentation is disregarded, are non-ap-
propriate and therefore forbidden.
m
You have build in the plug-in module in other devices as the series b maXX 4400.
m
You have disregarded instructions of this operating manual.
m
You have not used the plug-in module according to the terms.
n
The plug-in module has been
m
installed inappropriate
m
connected inappropriate
m
put inappropriate into operation,
m
operated inappropriate,
m
mounted, connected, put into operation, operated and/or maintained from not qual-
ified or inadequately qualified personnel,
m
overloaded,
n
operated with
m
with defect safety devices,
m
not in proper form installed or without safety devices,
m
with not operative safety- and protection devices,
m
not within the required environmental conditions
m
You have reconstructed the plug-in module.
m
You have not referred to the instructions regarding maintenance in the components´
descriptions.
m
You have improperly combined the plug-in module with products of other manufactur-
ers.
m
You have combined the device with faulty and/or faulty documented products of other
manufacturers.
The „General sales terms and delivery conditions“ are always valid. These are at your dis-
posal, at the latest, since conclusion of the contract.
Summary of Contents for b maXX BM4-O-CAN-03
Page 69: ......
