49
9.9 User Sets
Four user sets (0-3) are available for the Baumer cameras of the VisiLine IP series. User
set 0 is the default set and contains the factory settings. User sets 1 to 3 are user-specific
and can contain any user definable parameters.
These user sets are stored within the camera and can be loaded, saved and transferred
to other cameras of the VisiLine IP series.
By employing a so-called "user set default selector", one of the four possible user sets
can be selected as default, which means, the camera starts up with these adjusted pa-
rameters.
9.10 Factory Settings
The factory settings are stored in "user set 0" which is the default user set. This is the only
user set, that is not editable.
9.11 Timestamp
The timestamp is part of the GigE Vision
®
standard. It is 64 bits long and denoted in
Ticks
*)
. Any image or event includes its corresponding timestamp.
At power on or reset, the timestamp starts running from zero.
1122354
1122454
1122554
1122754
1123154
1123354
1122654
1123054
1123254
*) Tick is the internal time unit of the camera, it lasts 1 nsec.
◄ Figure 43
Timestamps of recorded
images.
Summary of Contents for VisiLine
Page 1: ...Baumer VisiLine IP User s Guide for Gigabit Ethernet Cameras...
Page 2: ...2...
Page 67: ...67...
