MB098b - 11084697
Baumer_HOG16-HOG16M-B_II_DE-EN (20A1)
2
General notes
1
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The
incremental encoder HOG 16 is an opto electro nic precision measurement device
which must be handled with care by skilled personnel only.
1.3
The expected
service life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
The expected
service life of the carbon brushes depends on the electrical current and is usu-
ally consistent with the service life of the ball bearings.
1.5
The
storage temperature range of the device is between -15 °C and +70 °C.
1.6
The
operating temperature range of the device is between -40 °C and +100 °C,
measured at the housing.
1.7
EU-Declaration of Conformity meeting to the European Council Directives.
1.8
The device is
UL approved.
1.9
We grant a
2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.10
The device may be only opened as described in this instruction.
Repair or maintenance work
that requires opening the device completely must be carried out by the
manufacturer. Altera-
tions of the device are not permitted.
1.11
In the event of
queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.12
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
on the device invalidates warranty.