Baumatic STD6.2SS-W, Instruction Manual, Page: 14 / 28

Fitting the carbon filter
If the appliance is going to be used in recirculation mode then it is
necessary to a fit carbon filter. This will help to absorb unpleasant
odours caused by cooking.
14
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
ENSURE THAT YOU HAVE DISCONNECTED THE
COOKER HOOD FROM YOUR MAINS SUPPLY.
1) Remove the metal filter by sliding the securing nibs at the sides of
the grill on the underside of the cooker hood.
2) Place the acrylate carbon filter above the metal and paper grease
filters.
3) Use the small steel wire to press the acrylate carbon filter into
place. Make sure the acrylate carbon filter is fitted neatly and securely
and cannot be removed.
4) Replace the grease filter.