Baumatic QUATTRO.MR, Instruction Manual, Page: 23 / 32

The blue wire must be connected to the terminal marked “N”
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked “E” (earth), or by the earth symbol, or coloured green and
yellow.
o
When the connection is completed, no stray strands or cut wire
should be present. The cord clamp must be secured over the outer
sheath.
Positioning
o
It is advisable that your appliance is only installed in a location
where the ambient temperature of the room, corresponds with the
climate classification that is stated on the rating plate of your
appliance. Your appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
Climate classification Appropriate ambient temperature
SN +10 to +32 degrees centigrade
N +16 to +32 degrees centigrade
ST +18 to +38 degrees centigrade
T +18 to +43 degrees centigrade
o
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
o
Your appliance should not be located in direct sunlight or exposed
to continuous heat or extremes of temperature (e.g. next to a
radiator or boiler). If this is not feasible, then you should install an
insulation plate between the appliance and the adjacent heat
source.
o
You should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.
o
Place the appliance flatly and firmly on a solid base. The appliance
is fitted with adjustable feet on the front side, which can be used to
level the appliance.
o
Anything positioned above the appliance must be at least 5 cm
away to allow sufficient cooling of the condenser. You must also
allow a 5 cm gap to the rear and sides of the appliance.
o
If you are placing another cooling appliance next door to this
product, then there must be a gap of at least 5 cm between the
appliances. This will help to prevent condensation from forming.
23