Baumatic QUATTRO.MR, Instruction Manual, Page: 17 / 32

o
The twist ice maker has to be manually filled with water. To do
this, pull out the section with the 3 dials on it (shown in the
picture on the previous page) and then fill it with cold, drinkable
water.
o
Once the water has formed into ice cubes, you should then turn
any of the 3 dials to deposit ice into the ice cube storage section
below.
o
Once ice has been deposited, you can then refill the twist ice
maker with water.
o
You should clean the ice cube storage case regularly using warm
water. You should dry the ice cube storage section thoroughly.
o
If you are not going to use the ice cubes contained in the ice
cube storage section for a long period of time, then you should
clear the remaining ice cubes.
Normal operating noises
Ice cracking noise
o
Can be heard during the automatic defrosting process.
o
Can be caused by expansion and contraction within the fridge
freezer.
Short cracking noise
o
Can be heard when the thermostat turns the compressor on and
off.
Compressor noise
o
There will be an operating noise when the compressor is running.
o
After installation, the compressor may be noisier for a short
period of time.
Bubbling and burbling sound
o
This noise is emitted as the coolant flows through the pipework
within the fridge freezer.
Water flowing sound
o
This is caused by water flowing into the evaporating tray during
the defrosting process and can be heard whilst the fridge freezer
is defrosting.
17