19
o
The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
My appliance isn’t working correctly
o
The cooking zones are not functioning or will not switch
on.
*
Check that the mains electrical supply to the appliance is correct
and working. Check the mains fuse.
o
The residual heat indicator has not come on after I have
switched a cooking zone off.
*
The cooking zone has only been turned on for a short period of
time; therefore it did not go above 50°C.
*
IMPORTANT:
If the cooking zone does appear to be hotter than
50°C and the residual heat indicator has not come on, you
should call the Baumatic Service Department.
o
A humming sound is heard when a cooking zone is
selected.
*
This is normal; the sound will disappear when the zone heats up.
o
The cooking zones have become discoloured
*
This maybe caused by burnt on remnants of food. This will not
affect the working of the appliance. However you should make
sure that the cleaning instructions are being followed regularly.
o
Only one of the zones on my hob are working
*
You should recheck that the terminal screws are all fully
tightened between the links.
Summary of Contents for PVC2SS Pythagora
Page 1: ...1 PVC2SS Pythagora 30cm 2 hyperspeed zone ceramic domino hob...
Page 23: ...23...
Page 24: ...24...
