(A)
Sealing strip
(B)
Clamp
(C)
Screw
o
Place the clamp
(B)
over the holes that match the size of the
screws. There are one set of screw holes in each corner of the
hob. Slightly tighten a screw
(C)
through the clamp
(B)
so that
the clamp is attached to the hob, but so that you can still adjust
the position of it.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
On the underneath of the hob, adjust the clamps into a position
that is suitable for your worktop. Then fully tighten the screws
(C)
to secure the hob into position.
16
Summary of Contents for PVC2SS Pythagora
Page 1: ...1 PVC2SS Pythagora 30cm 2 hyperspeed zone ceramic domino hob...
Page 23: ...23...
Page 24: ...24...
