Baumatic BWM50, Instruction Manual

Page: 6 / 36

6
Important safety information
Your safety is of the utmost importance to
Baumatic. Please make sure that you read this
instruction booklet before attempting to install or
use the appliance. If you are unsure of any of the
information contained in this booklet, please
contact the Baumatic Advice Line.
General Safety
o
Repairs to your appliance must only be carried out by a
Baumatic engineer or one of its authorised service agents. Any
attempt by an inexperienced person to repair the appliance,
could result in injury or damage to your washing machine.
o
If you notice that the mains cable is damaged. The appliance
must not be used. The same applies if you notice that the
worktop, control panel or base area is damaged. As this could
allow access to the internal components of the machine.
o
The appliance should be turned off and isolated from the mains
supply, before either cleaning or maintenance work is attempted.
o
The mains cable must not be used to pull the plug out of the
electrical socket.
o
The machine should not be sprayed with water.
o
The machine should be allowed to cool before carrying out an
emergency drain or cleaning the drain filter.
o
It is possible for small animals to chew either the mains cable or
water hoses, which could cause an electric shock hazard.
Installation
o
The installation instructions contained within this user manual
should be followed.
o
It is obligatory for the completed installation to comply with all
relevant building regulations and local water authority
requirements.
o
The machine should not be installed near open flames or in wet
areas.