Baumatic BWM50, Instruction Manual

Page: 17 / 36

17
Delay start
You are able to delay the start of a wash cycle so the laundry is
finished at a time that is most convenient to you.
o
You should introduce the detergent into the detergent drawer or
drum and then add the laundry as normal. You can then select
your required wash program following the instructions outlined in
the previous section.
o
Instead of pressing the start / pause button (7) to begin the
program straight away, you should press the preset button (3)
to set a delayed time.
o
Each press of the preset button (3) will increase the delay time
by 1 hour. The number of hours displayed indicates when the
wash cycle will come to an end.
o
The washing machine will begin the program automatically, at an
appropriate time to ensure that the wash program is complete
by the time you have set. For example, if you program a delay
time of 3 hours, this means that the wash program will be
finished in 3 hours.
o
You can set a delay time from 2 to 24 hours.
Safety lock
In order to prevent any inadvertent operation of the control panel, you
can set a safety lock to deactivate all of the buttons.
o
After the wash program has started, press the preset button (3)
and the wash temperature button (5) simultaneously for about 2
seconds. The machine will then beep to indicate that it has
entered the safety lock state.
o
All the buttons will be deactivated and the display will show “CL”
with a safety lock icon and the remaining or preset time
alternatively.
o
To release the safety lock, press the preset button (3) and the
wash temperature button (5) simultaneously for about 2
seconds again. The machine will beep again to indicate the
safety lock has been deactivated.