background image

Door 

 

o

 

You should regularly check to see if any deposits have formed, 
or there are any foreign bodies inside or underneath the rubber 
door gasket. This sits inside the opening of the porthole door. 

 

Installation 

 

IMPORTANT: THIS INSTALLATION MUST BE 
COMPLETED BY A SUITABLY QUALIFIED PERSON. 
BAUMATIC ONLY SANCTION THE INSTALLATION 
GIVEN IN THIS INSTRUCTION MANUAL. YOU 
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE 
YOU NEED TO TRANSPORT THE MACHINE IN THE 
FUTURE.

 

 
Locating your tumble dryer 
 

o

 

Before commencing installation, check the location where you 
intend to install the appliance. You should make sure that you 
have everything in place that is necessary for the correct 
installation. 

 

o

 

Do not place or store your tumble dryer in a location where the 
ambient temperature could fall below 0°C, otherwise the water 
used in it could freeze up. 

 

o

 

Never place or store laundry products on top of the appliance. 

 
Wall hanging installation 
 

o

 

You will need the supplied installation components shown below 
in order to complete the installation.  

 

 
 

o

 

Before commencing the installation process you will need to 
reverse the control panel so that it is readable once the 
appliance is installed the other way up.  

 

o

 

You are able to fix the alternative label, supplied with the 
appliance, to the control panel to replace the one already on it.  

 

16

Summary of Contents for BVD50

























Reviews: