Baumatic BT2740SS, Instruction Manual

Page: 31 / 40

Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance must be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o
The spur outlet must still be accessible even when your oven is
located in its operating position.
o
Cable type: H05 RRF 3 core x 2.5 mm²
Connecting the mains supply cable
IMPORTANT
The wires in the mains lead are
coloured in accordance with the
31
following code:
BLUE NEUTRAL
LIVE
o
Open the mains terminal block cover as shown, unscrew the
cable clamp (A) and unscrew (not fully) the screws in the mains
terminal block (L, N, E) which secure the three wires of the
e
o
Allow
cleaning, but do not let it hang closer than 50mm to the floor.
GREEN AND YELLOW EARTH
BROWN
mains cable.
o
Fit th cable and refit the cable clamp (A).
sufficient cable length for the cooker to be pulled out for