12
:
The cooker hood must not be
fitted above stoves with a
radiant top plate.
---------------------------------------
:
We recommend that at least
two people install this hood.
:
Do not tile, grout or silicone
this hood to the wall.
-------------------------------------
Your Baumatic Cooker Hood should only be fitted on a wall or under a kitchen
wall unit. Do NOT position it any less than 700 mm (70 cm) above the hob.
FITTING THE HOOD ONTO A KITCHEN WALL
1) Remove the grease filter grilles (see page 9)
2) Position the hood against the wall and mark the position of the support
holes ‘D’ and the anchoring holes ‘E’ (see Figure 5 - below).
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
COOKER HOOD THAT YOU CAN ADAPT
IT AS AN EXTRACTION FAN. IF THIS
IS THE CASE, YOU’LL NEED TO ATTACH
A SPIGOT (‘A’ in Fig.3 at bottom of
next page) AND DUCTING. YOU’LL
ALSO NEED TO HAVE PREPARED YOUR
WALL EXHAUST SYSTEM PROPERLY
INSTALLATION INSTRUCTIONS – Setting up your Hood
PLEASE NOTE
THAT ALL
NEEDED
SCREWS AND
RAWLPLUGS
ARE INCLUDED
WITH YOUR
COOKER HOOD
AS BAGGED
ACCESSORIES.