
Cleaning the oven door / How to remove the oven doors
For a more thorough clean, you can remove and disassemble the oven door. Proceed as follows:
• Open the door to the full extent (fig. 1)
• Open the lever A completely on the left and right hinges (fig. 2)
• Hold the door as shown in (fig. 3) approximatley 30 degree angle upwards
• Gently close the door (fig. 3) until left and right hinge levers A (fig. 2) are hooked to part B (fig. 2) of the door
• Withdraw the hinge hooks from their location following arrow C (fig. 4)
• Rest the door on a soft surface, to reduce risk of damage to the door
• To replace the door, repeat the above steps in reverse order
Removing the Inner and centre Panes of Glass
• Triple Glazed oven door: Remove the top frame (G) by unscrewing the 2 screws, located on the left and right sides
• Gently pull out the inner pane of glass (fig. 1). Also remove the centre pane of door glass (fig. 2).
• Clean the glass panes with an appropriate cleaner. Dry thoroughly, and place on a soft surface.
• Now you can also clean the inside of the outer glass.
• Clean the glass door using non-abrasive products or sponges and dry it with a soft cloth.
• Do not use the oven without the inner door panes fitted correctly. When re-fitting inner glass door panes ensure
they go back in facing the same way they came out. The doors are coated with a very slight reflective coating to
reflect the heat back into the oven cavity and keep the outer door cooler to touch.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch
the surface, which may result in shattering of the glass.
Fitting oven accessories and cleaning
G
Fig. 1
Fig. 2
Replacing the Oven Lamp
• Disconnect the oven from the power supply at the
fuse-box by means of the switch used to connect
the appliance to the electrical mains or unplug the
appliance if a gas model.
• Remove the glass cover of the lamp-holder by
rotating anti-clockwise. Be aware that the glass
may be difficult to remove if there is a build up of oil
and grease created during cooking. In this case the
glass may need to be cleaned with hot soapy water
to break this build up.
• Remove the lamp and replace with a lamp resistant
to high temperatures (300ºC) with the following
characteristics:
•
Voltage: 220-240V
•
Wattage: 25W
•
Type: E 14
Replace the glass cover. Reconnect the appliance
to the mains power supply.
Fitting oven accessories and cleaning
20 Baumatic 540mm Upright Cooker FITTING OVEN ACCESSORIES AND CLEANING
Baumatic 540mm Upright Cooker FITTING OVEN ACCESSORIES AND CLEANING 21