5) Measure the distance
between the two screwholes
on the top of the fridge door.
6) Draw a line that is the
length of that measurement
(D) on the rear of the
furniture door. This line
should be drawn at the point
that you marked in step 4.
It must be made at a 90°
angle to the centre line.
o
Place the front brackets on the horizontal line. Ensure that the
bottom of each bracket is in line with the horizontal line that you
have just marked.
o
IMPORTANT: The distance on either side of the centre line must
be equal.
7) Using a bradawl, mark the
centre of the holes in the
front brackets.
o
Remove the brackets.
o
Using a drill with a 3 mm drill bit; drill a hole on the two marks
that you have just made. The hole should be drilled to a depth of
5 – 8 mm.
21
Summary of Contents for BR17A
Page 1: ...U d BR17A Built under fridge with freezer compartment...
Page 31: ...31...
Page 32: ...32...
