Baumatic BR17A, Instruction Manual

Page: 20 / 32

Installing your refrigerator
If you need the appliance door to open from the other
side, then please reverse the door before commencing the
installation process. (See “Reversing the door section”).
Tools required:-
o
Tape measure
o
Sharp pencil
o
Small flat bladed screwdriver
o
Spanner
o
Bradawl
o
Drill
o
3 mm drill bit
IMPORTANT: We recommend that two people install this appliance.
3) Measure from the
underside of the worktop to
the bottom of the front
brackets (A).
o
Measure from the
underside of the
worktop to the top of
the appliance door
(B).
4) Measure the width of the
furniture door, at the
halfway point mark a line
down the inner surface of
the furniture door. The line
should go down the entire
length of the furniture door.
o
Deduct measurement (B) from measurement (A), this gives you
distance (C).
o
Measure distance C from the top of the furniture door and at a
90° angle; mark a line across the centre line.
20