background image

 

Dear customer!

 

 

This appliance is intended for use in households. 
Our products are packed in environment-friendly materials which can be recycled, 
disposed of, or destroyed without imposing any burden on the environment. 

 
 

Instructions for use

 

 

Instructions for use are intended for the user. They describe the appliance and its 
operation. The instructions apply to various types of appliances and may therefore 
include description of functions that may not be available on your appliance. 
 
These instructions are only valid of the country symbol is indicated on the appliance. If 
there is NO county symbol in the appliance, technical instructions should be observed for 
adapting the appliance to comply with the requirements and regulations for use in your 
country. 

 
 

Instructions for connection

 

 

The appliance must be connected in compliance with the instructions attached to it, as 
well as in compliance with relevant regulations and standards. The connection may only 
be performed by a qualifi ed person. 

 
 

Rating plate

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The rating plate indicating the basic information on the appliance is attached to the lower 
side of the hob. 
 
 
 
 
 
 
 
 
 
 

The Manufacturer strives for continuous improvements. For this reason, the text 
and illustrations in this book are subject to change without notice. 
 
Keep these instructions in a safe place and ensure that new users are familiar with 
the contents. Pass them on to any future owner. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

Important warnings 

4

Installation 5
Connection to the power mains 

6

Connection to the gas supply 

7

Technical informations  

9

Operating the induction cooking zones 

12

Operating the gas burners 

15

Cleaning and maintenance 

17

Summary of Contents for BMEH93G2I









































Reviews: