Baumatic BMEH93G2I, Instructions For Use And Installation

Page: 14 / 40

14
Timer Timer facilitates the cooking procedure by setting the period of hotplate operation, and it
can also be used as alarm timer.
Activating the timer
• Touch the hotplate ON/OFF sensor (A) of the relevant hotplate.
• By touching the »+« or »-« (E or D) sensor select the power setting from 1 to 9.
• Touch the timer ON/OFF sensors (E+D) to activate timer. Timer display indicates »00«.
• By touching sensors »+« or »-« (E or D) set the desired cooking time (from 01 to 99
minutes). After a few seconds timer starts operating. Timer controlled hotplate control
lamp is on and is blinking.
You can use timer to set exact cooking time for each hotplate at the same time. To
speed up the timer setting keep the relevant sensors »+« or »-« (E or D) constantly
pressed.
Altering preset cooking time
• You can change preset cooking time whenever you wish during the hotplate operation.
• Touch the hotplate ON/OFF sensor (A) to select the desired hotplate. Decimal dot is
on.
• Touch the timer ON/OFF sensors (E+D) to activate the timer.
• By touching sensors »+« or »-« (E or D) set the new desired cooking time.
Remaining cooking time
You can display the remaining cooking time by touching the hotplate ON/OFF sensor (A)
and then (E+D), or by activating at the same time again and again (D+E) keys, the time
that will be showed is refered to to the zone that displays the dot blinking.
Shorter residual time will be always shown on timer’s display:
▪ In case time is relative to a cooking zone, decimal point will flash at its display.
▪ In case time is relative to “alarm timer”, there is not decimal point flashing.
Switching the timer off
When the preset time expires a beep is heard which you can either turn off by touching
any sensor or leave it to turn off automatically after 2 minutes. When the programmed
time finish also the cooking zone turns off.
Switching the timer of prior expiry of preset time:
• Touch the hotplate ON/OFF sensor (A) to select the desired hotplate. Decimal dot is
on.
• Touch the timer ON/OFF sensors (E+D).
• By touching the sensor »-» (D) set cooking time to »00«. Timer function is off, but the
hotplate continues to operate until you switch it off manually.
Alarm timer function Timer can be used as alarm also if it is already employed in timer control of one of the
hotplates. (The hob don’t turn off)
Timer setting
With the hob off:
• Touch the hob ON/OFF sensor (C) to activate the cooking hob.
• Touch the timer ON/OFF sensor (E+D) to activate the timer.
• By touching sensors »+« (E) or »-« (D) set the desired time.
Switching the alarm off
When the preset time expires a beep is heard which you can either turn off by touching
any sensor or leave it to turn off automatically after 2 minutes.
If you want to switch the timer off prior expiry of preset time:
With the hob off:
• Touch the hob ON/OFF sensor (C) to activate the cooking hob.
• Touch the timer ON/OFF sensor (E+D).
• By touching the sensor »-« (D) set cooking time to »00«. Alarm function is off.
Simultaneously touch both »+« and »-« (E and D) sensors and switch the timer off.
• During the time the alarm is activated, timer can be preset for any hotplate.