background image

 

11

sing the ceramic hob

 

U
 

Before first use 

 
IMPORTANT: 
You should clean the ceramic hob surface (see 

umidity that has formed on 

 filled half full with cold water on 

 

l knobs 

indicates the 

right of each control knob, indicates which 

witching on a cooking

tting a power level 

est zone setting and eleven being the hottest zone 

ng, make sure that you turn the 

control knob to the 0 position. 

“Cleaning and maintenance” section). 
 

o

 

You should switch on one cooking zone at a time, for 5 minutes 
at the maximum setting. This will help to eliminate any new 
smell that exists and evaporate any h
the heating elements during transit. 

 

o

 

Do not burn off more than one zone at once. 

 

o

 

You must place a saucepan
each zone as you burn it off.

 
Control knobs 
 

 

All operations are performed by means of the 4 contro

o

that can be found on the right hand side of the hob top.  

 

o

 

The control knob should be turned to select a heating level. The 
numbers around the outside of each control knob 
power level that you have set the cooking zone to. 

 

o

 

A marking to the top 
zone that it controls. 

 
S

 zone and se

 
 
 
 
 
 
 
 
 

o

 

Turn the control knob of the zone that you wish to cook on. 

 

o

 

Each cooking zone can be adjusted between 1 and 11, one being 
the cool
setting. 

 

o

 

When you have finished cooki

 
 

Summary of Contents for BK600F

























Reviews: