o
The cable connections must be in accordance with the diagram
located on the bottom of the hob.
o
The brass links must be positioned as marked in the diagram
above and once established ALL terminal screws must be
tightened down firmly.
o
If when the hob is first switched on, only two of the zones
work, you should recheck that the terminal screws are all
fully tightened between the links. This should be done
before contacting the Customer Care Department.
o
IMPORTANT: The appliance must NOT be connected to the
mains supply by means of a 13A plug and socket.
o
The cable can be looped if necessary, but make sure that is not
kinked or trapped when the hob is in position. Care must be
taken to avoid the cable being in contact with hot parts of the
appliance.
19
Summary of Contents for BK600F
Page 1: ...1 BK600F 60cm 4 Radiant zone frameless ceramic hob...
Page 23: ...23...
Page 24: ...24...
