Baumatic BHI650, User Manual

Page: 25 / 36

24
o
The ceramic surface should be wiped with a damp cloth and a
small amount of washing up liquid.
o
Dry the appliance by rubbing the surface with a clean cloth.
Using a specialist ceramic hob cleaner
It is possible to purchase specialist ceramic hob cleaner/conditioner.
You should follow the instructions given by the manufacturer of the
specialist ceramic hob cleaner. You should ensure that it is suitable for
use on your appliance.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
AS / NZS 3000: 2007 WIRING REGULATIONS.
o
2010 ELECTRICITY SAFETY REGULATIONS
Positioning
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (depending on size) or 600 mm worktop that is at least 30
mm thick. The following minimum clearance distances must be
observed:-
o
700 mm between the hob surface and the underside of any
horizontal surface above it.
o
50 mm clearance around the sides and front of the appliance,
measured from the cut out.
o
55 mm clearance between the back of the hob surface and the
wall behind it, measured from the cut out.