Baumatic BGS460SS, Instruction Manual, Page: 25 / 36

25
o
You should grip the sides of the door at
the centre and then incline it slightly
towards the oven cavity. By pulling the
lower part of the oven door away from
the oven, the hinges will disengage from
the holes that they are located in.
o
IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o
The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT
have come into contact with any form of cleaning product
or chemical previously.
o
To refit the door you should slide the hinges
back into their slots and open the door fully.
o
IMPORTANT: The brackets (A) must be
closed back into their original positions before
closing the door.
Take care not to dislodge the hinge locking
system when removing the door, as the hinge
mechanism has a strong spring.
Do not immerse the door in water at any time.
INSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards or their European Norm
Replacements.
o
Building Regulations (issued by the Department of the
Environment).
o
Building Standards (issued by the Scottish Development
Department).
o
IEE Wiring Regulations.