Maintenance and cleaning
In daily use
o
Once a wash cycle has completed, you should pull out the
detergent drawer slightly, so it can dry out.
o
Leave the porthole door ajar for a short while after a wash cycle
has completed. This should help to prevent stagnant smells and
to protect the door seal.
o
After each washing program has finished, wipe up the remaining
water on the rubber seal ring and seal fold to prevent any
mildew and rot.
o
Close the water tap.
o
We suggest that you disconnect the appliance from your mains
supply, when it is not in use.
Control panel and washing machine cabinet.
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o
Wipe over the control panel and the external surface of the
machine using a brand new damp cloth with warm water.
o
If you ever spill any liquid detergent or conditioner from the
detergent drawer onto the washing machine cabinet, then these
should be cleaned up immediately as they could be corrosive.
Detergent drawer
Occasionally the detergent drawer should be cleaned, to remove any
detergent residue that has built up.
o
Pull out the detergent drawer
until you feel resistance.
o
Press the release catch and pull
out the drawer at the same time
to remove from the machine.
19
Summary of Contents for BFWM1206BL
