Baumatic BFWM1206BL, Instruction Manual

Page: 16 / 40

Wash program guidance
o
A wash program option, such as Economy or Easy-Iron can only be
selected if the program table advises that it is possible with the
wash cycle you have selected (see page 10 or 15 for details)
o
Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
o
The active phases will be shown on the control panel as
the wash program progresses.
o
Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure, water
hardness, external temperature etc., can affect the time it takes for
a wash cycle to complete.
Selecting a wash program
Setting a wash program
o
Use the washing program selection dial (4) to select the required
program.
o
If you wish to add an additional function, such as an extra rinse to
the cycle, press the relevant function button (1).
o
Once the desired program has been selected, press the start /
pause button (3) to begin the wash cycle.
End of cycle
o
When the wash cycle ends an audible signal will sound.
o
The door will unlock 2 minutes after the wash cycle has finished.
NOTE: The door will remain locked if the temperature inside the
drum is above 53°, or if there is too much water in the drum.
o
Rotate the program selection dial (4) to the OFF position (“O”).
o
Disconnect the appliance from the electricity supply.
16