Baumatic BFR6, Instruction Manual, Page: 17 / 28

Installing your rangehood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR RANGEHOOD WHETHER TO USE
IT IN EXTRACTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGE 23 NOW TO
UNDERSTAND THE DIFFERENCES BETWEEN THESE
TWO MODES.
o
We recommend that at least two people install this hood.
IMPORTANT: YOUR RANGEHOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
1) Remove the metal grease filters.
17
2) Position the hood against the wall
that you are intending to install it on and
mark the position of the support holes
that are to be drilled (as shown in the
figure below).
2a) The support screw holes
are indicated by figure A in
this drawing and the
anchoring screw holes are
indicated by figure B.