o
Check that the 3 in 1 tablet container is not going to foul the
upper spray arm, by rotating the spray arm around slowly. If it
does hit the 3 in 1 tablet container, you should move it.
o
Put a 3 in 1 tablet inside the 3 in 1 tablet container. Load the
appliance as normal and select the 3 in 1 wash program by
pressing the button marked “3 in 1”.
If your wash results are poor, then we would recommend
that you use a dishwasher detergent that doesn’t have
rinse aid and salt included in the tablet. The water softener
should then be adjusted to an appropriate level for the
hardness of the water in your area.
Setting a delay start
It is possible to delay the start of the wash program for up to a
maximum of 24 hours.
o
Check whether the appliance needs rinse aid or salt adding to it.
o
Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o
Push the top and bottom baskets fully back into position.
o
Add detergent
o
Turn the appliance on by using the ON/OFF button.
o
Press the relevant program selection button to choose an
appropriate wash program for the load that you are washing.
The light above the program selection button that you have
pressed will come on.
o
Use the delay start buttons to set the amount of time that you
want to delay the wash program by. The time that you have
selected will appear in the LCD display. You can adjust this time
up and down by pressing the delay start button with the relevant
arrow above it.
24
