Filling with rinse aid
The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on your dishes.
These droplets will lead to spots and streaks being left on
items after the wash program has completed.
o
Your dishwasher is designed to utilise liquid rinse aid.
o
The rinse aid dispenser is located inside the drop down door,
next to the detergent dispenser.
o
To access the rinse aid dispenser,
you should turn the cap anticlockwise
and it will pop out of the hole. Then
slowly pour in liquid rinse aid, the
rinse aid dispenser will hold
approximately 140 ml of rinse aid.
o
You should continue to fill with rinse aid, until the level indicator
turns completely black.
o
Be careful not to overfill the dispenser, as this could cause
oversudsing when a wash program is selected. Wipe away any
rinse aid excess or spillages with a damp cloth.
o
Replace the cap and turn it clockwise until it locks into position.
o
You should refill the rinse aid dispenser when the rinse aid
indicator neon lights on the control panel.
o
IMPORTANT: If you are using 3 in 1 dishwasher tablets then
you should still fill the rinse aid dispenser.
Setting the rinse aid level
The amount of rinse aid that the dishwasher requires also depends on
the hardness of your water. You should experiment with the rinse aid
setting, until you find a level that gives the best results.
o
On the first wash cycle, we would recommend
that the rinse aid level is set to number 2.
o
If you get water spots and poor drying
performance, then you should turn the arrow
anticlockwise and increase the setting to the next
number.
13
