At the end of a wash program
o
At the end of a wash program, an audible signal will sound for a
period of time.
o
Use the ON/OFF button to switch the dishwasher off.
o
IMPORTANT: You should leave the appliance for 15 minutes
BEFORE opening the door. This will allow the steam generated
from the final rinse(s) to dry the dishes.
o
Carefully open the door of the appliance and leave it ajar for a
few minutes and allow any remaining steam to disperse.
o
WARNING: Hot steam may escape when the door is first
opened, so care should be taken.
o
Unload the dishwasher; you should take care in case any of the
items are still warm.
o
IMPORTANT: If you leave the door of the dishwasher shut and
do not unload the dishwasher for a prolonged period of time,
then you may get water droplets reforming on the washload.
The 3 in 1 wash program
Make sure that the water softener has been filled with salt
and that the water softener has been set to its lowest
setting.
Make sure that the rinse aid dispenser has been set to an
appropriate level.
THIS WASH PROGRAM MUST BE SELECTED IF YOU ARE USING 3
IN 1 DETERGENT. IF YOU USE ANY OTHER WASH PROGRAM
WITH 3 IN 1 TABLETS, THEN THE WASH PERFORMANCE MAY
NOT BE AS GOOD.
o
Hang the 3 in 1 tablet container on the underneath of the upper
basket, in the position shown on the diagram.
23
