Baumatic BCG900SS, Instruction Manual, Page: 36 / 44

36
MPORTANT: You must change the oven and grill injectors.
MPORTANT: After changing the injectors YOU MUST follow the
ner
All work must be carried out by a GASSAFE
egistered engineer.
o
Remove the thermostat knob.
turning the relative knob to the
r
b back to the
m position and, using a small screwdriver, turn the
flame must be short for an efficient reduced rate setting.
They must be stable to prevent them from accidently going
rimary air, light the burner. While watching
the flame, loosen the screw and adjust the sleeve the obtain
s have been
made.
carry out a gas tightness
test.
ement
st be carried out by a GASSAFE
egistered engineer.
IMPORTANT: Always isolate the cooker from the electricity
upply before changing the gas taps.
heads.
I
I
minimum flow adjustment section below.
Minimum flow adjustment for the oven bur
r
o
Switch on the oven burner by
maximum position then wait fo
about 10 minutes.
o
Slowly turn the kno
minimu
screw to the right to lower the flame or to the left to increase
it.
o
The
out so they must be able to withstand normal oven door
manoeuvres.
o
To adjust the p
2.5 mm for natural gas and 3 mm for LPG.
o
Lock the screw in place once the adjustment
o
IMPORTANT: On completion
Gas tap replac
All work mu
r
s
o
Remove all pan supports and burner