Baumatic BCG900SS, Instruction Manual, Page: 35 / 44

35
n
t adjustment is ob
o
Make sure that the flame does not go out by quickly turning
minimum flow. If it does then remove
the control knob and make further adjustments to the gas
ll work must be carried out by a GASSAFE
upply before changing the injectors and/or adjusting the
inimum flow of the burners.
o
Unscrew the injectors and replace
them with the stipulated injector
for the new gas supply (see table
on page 33 - 34).
o
Unscrew the adjust
or tighten the adjus
o
The correc
length of about 3 – 4 mm.
o
For butane/propane
screwed in.
ing screw, in order to increase the gas flow
ti g screw to decrease the gas flow.
tained when the flame has a
gas, the adjusting screw must be tightly
o
Refit the control knob.
from maximum flow to
flow, testing it again once the adjustment has been made.
o
IMPORTANT: On completion carry out a gas tightness
test.
Gas adjustment (Conversion to LPG for the oven and grill)
A
registered engineer.
IMPORTANT: Always isolate the cooker from the electricity
s
m
o
Free the burners from their
fixing screws.