Baumatic BCG900SS, Instruction Manual, Page: 34 / 44

o
Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
IMPORTANT: After changing the injectors YOU MUST follow the
minimum flow adjustment section below.
OPERATING
PRESSURE GAS
RATE DIAMETER
INJECTOR
HEAT
INPUT
BY-PASS
BURNERS
GAS MBAR g/h L/h 1/100 mm MIN MAX 1/100
mm
LPG -
Butane 28-30 218 88 800 3000
LPG -
Propane 37 214 88 800 3000
Rapid
Natural 20 286 117-Y 800 3000
44
LPG -
Butane
28-30 131 68 600 1800
LPG -
Propane 37 129 68 600 1800
Semi-rapid
Natural 20 171 98-Z 600 1800
34
LPG -
Butane
28-30 73 51 400 1000
LPG -
Propane 37 71 51 400 1000
Auxiliary
Natural 20 95 75-X 400 1000
28
LPG -
Butane 28-30 276 98 1600 3800
LPG -
Propane
37 272 98 1600 3800
Ultra-rapid
Natural 20 362 135-K 1600 3800
62
LPG-
Butane 28-30 284 94 1000 3900
LPG -
Propane
37 279 94 1000 3900 Oven
Natural 20 371 142 1000 3900
52
Minimum flow adjustment for hob gas taps.
All work must be carried out by a GASSAFE
registered engineer.
o
Light the burner and set the knob at the
minimum position.
o
Remove the knob from the tap. The
adjustment screw is located beside the valve
body.
34