o
For butane/propane gas, the adjusting screw must be tightly
screwed in.
o
Refit the control knob.
o
Make sure that the flame does not go out by quickly turning
from maximum flow to minimum flow. If it does then remove
the control knob and make further adjustments to the gas
flow, testing it again once the adjustment has been made.
o
IMPORTANT: On completion carry out a gas tightness
test.
Fitting a stability chain
36
chain.
IMPORTANT: It is a legal requirement for your
CORGI registered installer to fit a stability
The stability hook should be securely fixed to the fabric of the building,
in an adjacent position to the safety chain at the rear of the appliance.
The chain should be kept as short as is practical.
Summary of Contents for BC190.2SS
Page 1: ...KirThat 1 BC190 2SS 90cm Single cavity gas range cooker...
Page 42: ...42...
Page 43: ...43...
Page 44: ...44...
