Baumatic BAO6008-P Instruction Manual Download Page 24

 

2

3

emoving the oven door for cleaning 

o facilitate the cleaning

 outer frame 

f the oven, the door can be removed as follows:- 

o

 

If you raise both of the movable bolts 

(B)

, then the hinges 

(A)

 

ity and then by pulling it 

gently away from the oven cavity. 

o

 

 

oor on some padded 

material whilst cleaning it. 

 

o

 

g a 

unt of detergent. The cloth 

MUST 

NOT

 

have come into contact with any form of cleaning product 

 

o

 

 

 

fore closing the door. 

e hinge 

locking system when removing the door, 
as the hinge mechanism has a strong 

 

o

 

 

R
 
 

 
 
 
 
 
 
 
 
T

 of the inside of the oven and the

o
 

o

 

The hinges 

(A)

 have two movable bolts on them 

(B)

 

are released from the oven housing. 

 

o

 

You should grip the sides of the door at the centre and then 
incline it slightly towards the oven cav

 

IMPORTANT: 

You should make sure that the door is supported

at all times and that you place the d

The oven door and door glass should only be cleaned usin
damp cloth and a small amo

or chemical previously. 

To refit the door you should slide the hinges back into their slots
and open the door fully.

 

o

 

IMPORTANT: 

The movable bolts 

(B) 

 must be closed back into 

their original positions be

 

 

o

 

Take care not to dislodge th

spring. 

Do not immerse the door in water at an
time. 

 

 

Summary of Contents for BAO6008-P































Reviews: