Baumatic BAF90EG, User Manual

Page: 10 / 28

10 Baumatic BAF90EG 900mm Upright Oven User Manual
Support Legs
• The cookers are supplied with four transit supports (one for each corner).
• Four support legs are supplied separately and are fitted on location to the four corners of the lower support frame.
Each support leg is pushed over the relevant transit support until flush with the support frame.
• Each leg is adjusted by screwing the lowe r section in or out as required for fitting to a 900mm bench height.
For lower bench tops adjust the height of the legs to 180mm so the hob is located 10mm above the horizontal
combustible surface, ref. AS/NZS 5601.
Support Legs
Important
• Before leaving instruct the owner in the use of the cooker it should be expressly noted that we cannot accept any
liability for direct or indirect damage caused by wrong connection or improper installation. When being repaired,
the appliance must always be disconnected from the mains supply; if required, notify our customer service.