5.
Sit the coffee machine in the housing unit. You must make sure
that the coffee machine is flush with the housing unit, otherwise
it will not line up properly with the support pieces.
6.
There are two screw holes on the main body of the coffee maker,
one on the right hand side of the machine and the other on the
left hand side. You have to open the water reservoir door (14)
and remove the water reservoir (15) to access the left hand
one.
7.
Fix the coffee machine against the housing unit by fully
tightening the screws provided, through the screw holes on the
above drawing.
8.
Follow the electrical connection information on page 24 and then
check that the appliance is functioning correctly.
IMPORTANT: You must follow the before first use section on pages
11 - 14.
26
Summary of Contents for BAEC2SS.2
Page 2: ...2 2...
