Baumalight MX530, Operator'S Manual, Page: 20 / 32

^ ^
DANGER
Prevent electrocution�
Death or serious injury can result if
equipment comes near or contacts
power lines�
Electrocution can occur without direct
contact�
Check clearance before raising equipment.
DO NOT leave the operator’s seat if any part of the
equipment contacts electric lines or cables.
1. Verify all reflectors and Slow Moving Vehicle
(SMV) sign are visible.
2. Carry mulcher low.
3. Verify hydraulics are disengaged.
4. Travel at a reasonable and safe speed.
^
WARNING
To prevent bodily injury from rotating
cutting wheel, be sure to disengage
hydraulics before transporting mulcher�
5.6 Transporting
During the first few hours of use, avoid hitting
stones as much as possible to allow the carbide
teeth (A) to wear slightly. This can be done by
keeping the cutting wheel above ground level.
Brand new carbide tips are razor sharp and
can chip and shatter easily when they hit hard
objects. Once the razor sharpness has worn
away, the tips do not chip as easily. Observing
these precautions will extend the life of the
carbide teeth and reduce operating expenses.
5.7 Carbide Teeth
Break-In
18