5�6 Transporting
1.
Verify all reflectors and Slow Moving Vehicle
(SMV) sign are visible.
2. Raise brush mulcher slightly off ground.
3. Verify hydraulics are disengaged.
4. Travel at a reasonable and safe speed.
^
WARNING
To prevent bodily injury from rotating
cutting wheel, be sure to disengage
hydraulics before transporting mulcher�
5�7 Carbide Teeth Break-In
During the first few hours of use, avoid hitting
stones as much as possible to allow the carbide
teeth (A) to wear slightly. This can be done by
keeping the cutting wheel above ground level.
Brand new carbide tips are razor sharp and can
chip and shatter easily when they hit hard objects.
Once the razor sharpness has worn away, the tips
do not chip as easily. Observing these precautions
will extend the life of the carbide teeth and reduce
operating expenses.
The teeth bolts must be retighten every ten minutes
for the first hour of use on a new mulcher.
A
700 Series Teeth
A
900 Series Teeth
16
