Baumalight GXM350, Operator'S Manual, Page: 8 / 24

2�3 Maintenance Hazards
Before servicing, park machine on a firm and
level surface, set parking brake and place a “Do
Not Operate” tag on control panel. Read and
understand this manual. If you do not understand
any part of the manual, contact Baumalight at 866-
820-7603.
Always wear face and/or eye protection, safety
shoes, and other protective equipment appropriate
for the job.
Do not make unauthorized modifications. Contact
Baumalight at 866-820-7603. Before you weld,
cut/drill holes, or make any other modifications.
Always use Baumalight replacement parts.
^
WARNING
Moving parts can crush and cut�
Keep clear of moving components�
Follow lockout procedure before
servicing�
^
WARNING
Crushing hazard�
Before performing inspections, service
or maintenance:
Park machine on firm, level surface.
Engage excavator parking brake�
Turn engine off and remove key.
Place “Do Not Operate” tag on control
panel�
^
WARNING
Entanglement hazard�
Keep clear of moving components�
Wear proper protective equipment
appropriate for the job�
^
WARNING
Burn hazard�
Hot and high pressure hydraulic oil�
Allow oil to cool before servicing�
^
WARNING
Drilling, sawing, sanding or machining
wood products can expose you to wood
dust, a substance known to the State of
California to cause cancer�
Avoid inhaling wood dust or use a dust
mask or other safeguards for personal
protection� For more information go to
www�P65Warnings�ca�gov/wood�
^
WARNING
Wear an approved dust mask or
respirator�
Follow local, state and federal
regulations�
6